Made in the USA, the Cast Metal tiles and bath accessories are “Cast in Questech”, a proprietary composite of metal, resin, and ceramic. The surface is real premium metal. Each tile and bath accessory comes from an original hand carved design.
Made in the USA, the Cast Stone tiles and bath accessories are “Cast in Questech”, a proprietary composite of crushed marble and resin. Each tile and bath accessory comes from an original hand carved design.
The Questech product will vary naturally from piece to piece. However, they do not vary from lot to lot like ceramic tile, and will always coordinate beautifully together.
They can be used on any interior wall, including wet areas. The tiles can also be used as a counter edge molding. Designated floor products may be used on both interior walls and residential/light commercial floors. Tiles are not suitable for countertop surfaces or exterior installations.
Tiles that are “Cast in Questech” can be installed using standard tile setting methods (polymer fortified thin-set, epoxy, and mastic). They cut easily with a wet saw or a spiral saw and can be drilled with a high-speed drill. Do not score and snap.
To ensure proper bond, high-temperature installations might require epoxy adhesive and grout. Examples, where epoxy is recommended, includes behind some kitchen cook-tops, fireplace surrounds and steam showers. See installation instructions for more information.
Our Retro Flatback bath accessories are designed for easy no cut installations over new & existing shower walls. They complement any ceramic, porcelain, metal and stone tile. Our Easy as 1,2,3 Installation instructions are included in every product box. Adhesive is sold separately; use either a Polyurethane Construction Adhesive or GEL Epoxy. See installation instructions for more information.
Questech tiles are protected by Q-Seal, a factory-applied, permanent sealer that is guaranteed to be water and stain resistant for as long as you own your home. The sealer also provides abrasion resistance and includes an anti-bacterial ingredient – Ultra-Fresh®, that inhibits the growth of mold and mildew.
Sealers cannot penetrate or adversely affect Q-Seal. Simply wipe excess sealer off the piece.
The surface can be cleaned with any ordinary household cleaner. Harsh chemicals like bleach should be wiped away shortly aﬅer application. Do not use abrasive implements for cleaning, for example, scouring pads and steel wool are not recommended.