Natural Stone

Cast Metal Cast Stone Cast Color Natural Stone Accessories

Applications

WALL & FLOOR: Tiles are recommended for use as both a wall and floor covering in interior applications.
COUNTERTOPS: Tiles are suitable for use as a countertop surface.
WET AREAS: The tiles can be installed in wet areas such as backsplashes, bathroom walls and shower enclosures, but are NOT recommended in wet areas where pool chemicals are present (swimming pools, hot tubs, etc.)
EXTERIOR: Tiles are NOT recommended for exterior applications.
RESIDENTIAL & COMMERCIAL: Tiles are recommended for residential and light commercial applications.

Q-Seal™ Permanent Protection

The top surface of each tile is protected by Q-Seal, a permanent sealer that is water and stain resistant, protects against abrasion, and features Ultra-Fresh® anti-microbial protection, which inhibits the growth of stain and odor-causing mold and mildew. Q-Seal is factory-applied and never needs re-sealing.

Installation Instructions

Follow generally accepted good practices for installation of natural stone tile. Follow these instructions specific to Tumbled Marble with Q-Seal.

The tile surface is protected by Q-Seal, making it unnecessary to seal the tile before or after installation.
Do NOT use scouring pads, steel wool, sandpaper, or other abrasive implements to remove grout haze, or damage to the Q-Seal protector and/or tile surface may result.
Grout sealer inadvertently applied to the tile surface should be wiped off before it dries on the surface.

Care and Maintenance

Foods and beverages will not stain the tile if cleaned up in a reasonable amount of time. To clean, use a liquid, non-abrasive cleaner and a damp sponge.
Some pigmented foods and beverages (like mustard and wine) may leave permanent stains if not cleaned up soon after contact (within 2 hours).
For stubborn stains, an abrasive cleaner (like SoftScrub®) can be effective, but rub gently with a damp sponge. You may also use a specialty stain cleaner (like Oxiclean® Versatile).
After cleaning, rinse area thoroughly with a clean, damp sponge to remove any remaining cleaning solution.
Do NOT clean with scouring pads, steel wool, or other abrasive implements or damage to the Q-Seal protector or tile surface may result.

Warranty

Q-Seal is guaranteed to be water and stain resistant for as long as you own your home. Please click for complete warranty information.